Characteristics of the Product
- Acquired KFI and UL Certifications
- A product that replaces the combination of TEE and NIPPLE
- Possible to directly connect flexible joints
Merits of the Product
Economic Feasibility
- Reduction of material costs by replacing the welding and screwing combination
- Reduction of work time and labor cost through simple construction
- Reduction of material loss without pipe cutting
Safety
- Reduction of leakage and rupture risks with the reduction of combination of TEE, NIPPLE and REDUCER
- Reduction of leakage risk due to the reduction of welding volume
Standards
![lo-dr1-1](http://pipels.com/wp-content/uploads/2023/02/lo-dr1-1.png)
![lo-dr2-1](http://pipels.com/wp-content/uploads/2023/02/lo-dr2-1.png)
![lo-data-1](http://pipels.com/wp-content/uploads/2023/02/lo-data-1.png)
Performance Test Result
Test Item |
Test Standard(KFI) |
PLS |
KFI |
Pressure-Resistance Test |
When applying 1.5 times of the maximum operating pressure, there should be no cracks, permanent deformation or damage. |
2.1MPa | pass |
Body Strength Test |
When applying 5 times pressure of the highest operating pressure (higher than 1.4MPa), there should be no cracks, permanent deformation or damage. |
7MPa | pass |
Test Item |
Test Standard(UL)) |
PLS |
UL |
Leakage Test |
When applying twice pressure of the highest operating pressure (300 PSI), there should be no cracks, permanent deformation or damage. |
600 PSI(4.14MPa) | pass |
Pressure-Resistance Test |
When applying 4 times pressure of the highest operating pressure (300 PSI), there should be no cracks, permanent deformation or damage. |
1200 PSI (8.27MPa) | pass |
Body Strength Test |
When applying 5 times pressure of the highest operating pressure (300 PSI), there should be no cracks, permanent deformation or damage. |
1500 PSI (10.34MPa) | pass |