Characteristics of the Product
- UL Certificate Approval
- Possible to produce with a roll grooving product
- Reduction of material costs compared to the existing TEE
Merits of the Product
Economic Feasibility
- Reduction of material costs compared to the existing TEE
- Reduction of construction cost due to the reduction of welding inch
- Reduction of work time and labor cost through simple construction
Safety
- Reduction of leakage risk due to the reduction of welding volume
- Reduction of leakage risk due to the reduction of connecting areas with groove coupling
- Possible to respond promptly to defects (possible to redo the construction after dissembling the joint area)
Standards
* For UL specifications, possible to manufacture up to main pipe 300
* The above standards may be partially changed to improve technology and quality.
* Above specifications are UL standards and contact us for KFI standards.
성능시험결과
Test Item |
Test Standard(KFI) |
PLS |
KFI |
Pressure-Resistance Test |
When applying 1.5 times of the maximum operating pressure, there should be no cracks, permanent deformation or damage. |
2.1MPa | pass |
Body Strength Test |
When applying 5 times pressure of the highest operating pressure (higher than 1.4MPa), there should be no cracks, permanent deformation or damage. |
7MPa | pass |
Test Item |
Test Standard(UL)) |
PLS |
UL |
Leakage Test |
When applying twice pressure of the highest operating pressure (300 PSI), there should be no cracks, permanent deformation or damage. |
600 PSI(4.14MPa) | pass |
Pressure-Resistance Test |
When applying 4 times pressure of the highest operating pressure (300 PSI), there should be no cracks, permanent deformation or damage. |
1200 PSI (8.27MPa) | pass |
Body Strength Test |
When applying 5 times pressure of the highest operating pressure (300 PSI), there should be no cracks, permanent deformation or damage. |
1500 PSI (10.34MPa) | pass |