Characteristics of the Product
- Acquired KFI
- Replaces existing TEE
- All-in-one type of the existing TEE and screw socket
Merits of the Product
Economic Feasibility
- Economical compared to the existing Tee and reduction of construction cost due to the reduction of welding volume
- Reduction of work time and labor cost through simple construction
- Reduction of material loss without pipe cutting
Safety
- Reduction of leakage risk due to the reduction of welding volume compared to the existing Tee
- Insufficient thickness of the pipe compared to Tee drawing and concerns about occurrence of stress cracks
- Reduction of leakage risk due to the reduction of combining points
Standards
Performance Test Result
Test Item |
Test Standard(KFI) |
KFL |
Pressure-Resistance Test |
When applying 1.5 times of the maximum operating pressure, there should be no cracks, permanent deformation or damage. |
3.0MPa |
Body Strength Test |
When applying 5 times pressure of the highest operating pressure (higher than 1.4MPa), there should be no cracks, permanent deformation or damage. |
10MPa |