Characteristics of the Product
- Acquired KFI
- Replaces existing TEE
- Has an welding improvement angle and excellent welding safety by PAD reinforcement
Merits of the Product
Economic Feasibility
- Economical compared to the existing Tee and reduction of construction cost due to the reduction of welding volume
- Reduction of work time and labor cost through simple construction
- Reduction of material loss without pipe cutting
Safety
- Reduction of leakage risk due to the reduction of welding volume compared to the existing Tee
- No concerns about insufficient thickness of pipe compared to Tee drawing and occurrence of stress cracks
Standards
* Possible to manufacture up to main pipe 300
* The above standards may be partially changed to improve technology and quality.
* Above specifications are UL standards and contact us for KFI standards.
Performance Test Result
Test Item |
Test Standard(KFI) |
KFL |
Pressure-Resistance Test |
When applying 1.5 times of the maximum operating pressure, there should be no cracks, permanent deformation or damage. |
3.0MPa |
Body Strength Test |
When applying 5 times pressure of the highest operating pressure (higher than 1.4MPa), there should be no cracks, permanent deformation or damage. |
10MPa |